How to layer heat transfer vinyl
heat transfer vinyl

One thing that is tricky to learn in creating custom vinyl designs is layering the heat transfer vinyl. There are always many questions asked around this topic. For example: Can layering be done on regular HTV? Can layering be done on glitter HTV? Etc.

Some enclosed is a quick list. It contains some tips to and answers to the vinyl layering questions.

1.Regular HTV (smooth htv) can be layerd for upto 4 layers.
2.Specialty vinyl like glitter, hologram, flock etc. can only be layered on regular HTV.
3. You cannot layer glitter over glitter or flocked over flocked. It is likewise for other specialty vinyls too.
4.  Specialty HTV cannot be the base for regular HTV. However, regular HTV can be used as a base for specialty HTV
5.  But, the layering in point number 4 is limited to 2 layers only.

Layering HTV on cotton

· Regular HTV

· Glitter HTV

· Cutter

· Cutting mat

· Heat press/ iron

· Cotton t-shirt dress

Steps

1. Make design setup
In the design space canvas, open the design and scale it to fit your garment.

2.  Make sure that the design has the mirror setting checked.

 

3.Cut and weed: HTV is cut in reverse.
So, make sure to load the vinyl sheet into the cutter with the shiny (color) side facing down and the adhesive side up. Continue to load and cut until each layer has been cut.

 

 4.Heat press or iron the images:
Start applying with the base layer of the design. Press every layer individually after pressing and peeling the previous one carefully. Make sure to place the next layer correctly on top of the base layer of the design.


5. Adding on glitter HTV
Now, on this design made out of regular HTV so far, we can add a layer of glitter HTV.

6.  Make sure while cutting the glitter HTV design the mirror setting is turned on .
Change the material type in the cutter to glitter iron on. Cut and weed ad discussed above.

 

 7. As a final step
Turn the garment inside-out and press for 20 seconds. This will make the adhesive on the vinyl adhere well and take out any lines created by the clear sheets.

in Tech
Basics of Siser Brick HTV
Siser brick HTV